Production and characterization of refractive index gratings in high-birefringence fibre optics

In this work, we report production and modelling of both Bragg gratings and rocking filters in high birefringence fibre optics. Bragg gratings are produced by UV (257.0 nm) external interferometric exposition of a frequency-doubled Ar⁺ ion laser, whereas for rocking filters formation the visible Ar⁺ ion laser lines in 488.0 and 514.5 nm are used in an internal method. The spectral characteristics due to the birefringence properties are studied through numerical methods and experimental techniques. The spectral responsivity of the structures under temperature changes and stress application is presented.     

两步相移实现投影栅相位测量轮廓术

提出一种新的投影栅相位测量方法--两步相移法。该方法只需两幅相移条纹图，因此计算量小，速度快。给出了实验及计算结果，并同四步相移法进行了比较，证明了该方法具有较高的精度。     

On Two Parallel Matched Gratings Demodulation Method of Fiber Grating Strain Sensor

The method of demodulation with two parallel matched fiber Bragg gratings( FBGs)system is introduced to enlarge the range of strain that can be detected by the FBG sensor system.     

Simplified analytic solutions and a novel fast algorithm for Yb-doped double-clad fiber lasers

In this paper, continuous wave Yb³⁺-doped double-clad fiber lasers (DCFLs) with linear-cavity are investigated theoretically and numerically using the rate equations. Under the steady state conditions, the simplified analytic solutions of Yb³⁺-doped DCFLs under considering the scattering loss are deduced in the strongly pump condition. Compared with the known analytic solutions in published literatures, our analytic solutions are more accurate, especially, at higher reflectivity of output mirror. In addition, a fast and stable algorithm based on the Newton-Raphson method is proposed to simulate numerically Yb³⁺-doped DCFLs. The results by simplified analytic solutions are in good agreement with those by the numerical simulation. Moreover, we have performed the optimization of an Yb³⁺-doped DCFL using the simplified analytic solutions and the numerical simulations, respectively.     

拖曳线列阵用光纤水听器的研究

报道了光纤水听器用于拖曳线列阵的研究结果。在保证光纤水听器声相位灵敏度的前提下, 优化设计了光纤水听器的结构,降低了光纤水听器的加速度灵敏度36dB。实验测得在20-1600Hz 频段,该光纤水听器的相位灵敏度为-162．7dB,频段内灵敏度的起伏为±0．7dB,加速度灵敏度小于-30dB。     

高功率双包层光纤激光器受激拉曼散射和热效应的理论研究

 受激拉曼散射和热效应会限制光纤激光器功率的提高。利用高功率光纤激光器的速率方程和热传导方程，理论研究了双端泵浦和分布泵浦下双包层光纤激光器的受激拉曼散射和热效应，得到了光纤中的泵浦光、激光和斯托克斯光的功率分布，光纤激光器的输出特性以及光纤中的温度分布。分析表明，当泵浦功率增大到一定值时，光纤激光器中出现SRS，一部分激光功率会转移给斯托克斯光，影响激光功率进一步提高;与双端泵浦方式相比，分布泵浦下光纤激光器的斜率效率和最大输出功率相差不大，但是，光纤中的温度分布被有效地降低，因此，分布泵浦方式更为有效。     

多波长啁啾叠栅的矩阵分析

在分析多波长啁啾叠栅特征的基础上，提出了多波长啁啾叠栅的矩阵分析模型，采用矩阵分析模型对4波长和8波长啁啾叠栅的反射谱特性进行了理论分析，数值分析结果与实验结果非常一致.还首次数值模拟了波长间隔0.8 nm的16波长啁啾叠栅.此方法对多波长啁啾叠栅的设计和制作具有参考价值.     

用于光纤电流传感器的BGO晶体磁光特性研究

在理论分析Bi4Ge3O12（BGO）晶体磁光特性的基础上，利用倍频法测量了不同工作波长下BGO晶体的费尔德常量，获得了与理论相符的实验结果.同时根据BGO晶体费尔德常量随波长的变化关系曲线，通过对该晶体吸收系数的测量，得出了其磁光优值曲线.进而将BGO晶体的磁光特性与光纤电流传感器常用的几种磁光材料作了对比，结果表明BGO晶体适合用于光纤电流传感器.     

掺铒光纤放大器中上转换过程的影响

掺杂浓度的提高影响了掺铒光纤放大器(EDFA)的性能,对经典Giles模型提出了新的要求。首先研究了高掺杂下铒离子距离较小引起的上转换过程的机理,通过优化速率方程模型分析了上转换过程对EDFA的影响,得出了在泵浦光和信号光远远大于ASE光的假设下泵浦光和信号光沿光纤长度变化的近似表达式,并将该近似分析解与解析解进行了比较。仿真结果表明上转换过程会降低随光纤传输的信号光和泵浦光,影响EDFA的放大性能,并得出了当掺铒浓度大于2.95×1025m-3时,上转换过程的影响不能忽略的结论。     

基于变截面梁的光纤光栅线性无啁啾调谐

从理论上分析了利用变截面（等强度）弹性梁实现光纤光栅波长线性、无啁啾调谐的基本原理，给出了实现无啁啾波长调谐的弹性梁截面满足条件及其设计方案，并讨论了矩形等截面和变截面悬臂梁调谐方案的特点.理论分析与实验结果均表明，通过对变截面梁侧向施加载荷，可以实现光纤光栅中心波长的线性无啁啾调谐，且系统结构简单、易于设计.